| Circuit CREATOR Q. We have upgraded our computer and have reinstalled circuit creator and are now getting an error " cannot create/get context " And we can not print any thing and the may be the same problem. A. This is not a Circuit Creator program error it must be a problem in your procedure of reinstalling the program in your PC. Can’t use copy paste for reinstall Circuit Creator program. You have to take all your data backup in other Hard drive or in the same Hard drive CC32.AKF file is your reg. file so please take extra care for this particular file and then remove it from your hard drive using Uninstall program and then reinstall it from it's master program CD's you receive from us with this program and register it and
then try to print your PCB file. If you are done same procedure for reinstalling Circuit Creator then reinstall your printer driver and then try to print PCB from Circuit Creator program. Q. After I downloaded your pc board program I tried to run it but it asked me for a missing cg32.dll file where could I obtain this file. A. You can download the Supporting DLLs from following website. http://www.advancedmsinc/update/ Downloaded file will be a zipped file. Unzip it and copy all the four .dll files into the same directory in which you have installed the software. You should be able to use the software.
Q. Every time that I have tried to pull down your PC Board design Cad software, I get a time out error! I've been trying to retrieve same fm the following site: http://216.150.88.190/pcbdesignandfab/software/ecad.exe
A. Please download the software from following website. http://www.advancedmsinc.com/download/cktdwnld.htm Follow the instructions of the download page to copy cc32.akf file to the circuit creator directory. It should not ask you to register again. However, to protect yourself save the current Circuit Creator directory as back up. If it asks you to register again, try to register. If the registration fails then send the file cc32.akf to us and we will help complete the registration. Q. I bought Circuit Creator a few months ago, may be October or November and have been using it. I registered it when I bought it. Now the software won't run, it says, "time limit up, and please reregister to reactivate". But when I reregister it says it did it correctly but it still won't work. It keeps saying time limit up. A. Please replace the "cc32.akf" file of your Circuit Creator Directory by the attached file. No need to register the software. The attached file has registration data. You should be able to use the software. Q. When I try to copy any component or any segment, I receive an error "Cannot Open File C:\CKTCRT\ezbpaste. $$$" How do I fix this error so that I can copy and paste. A. Fixing this error make sure you have defined current directory path in to your File /Preferance/Paths/Options/Screatch path. You must have to write down your current working directory paths like C:\CKTCRT\. Q. When I open the Circuit Creator software, receive this message: "Cannot create/get printer context" How can I solve this A. This was the bug in old version and especially if you are using Windows XP. Please download latest Circuit Creator software from our site www.advancedmsinc.com/download/ Q. I need to know how to uninstall the software from my current computer and install it in other new computer; this movement will be done next week. A. You have to go in Control Panel and select Add Remove tools and click on Circuit Creator Pro. And click ok now the process is starting to remove program from your PC. When it is done it gives you message to registration Circuit Creator. The software registration is linked with my current computer. You can store this registration file name is cc32.akf. Q. I received an error message from the 16-bit subsystem the "Virtual Device Driver format in the registry is invalid", so also please advise about this. I am running Win2K pro and the Circuit Creator. This error occurs right after clicking on Circuit Creator and also Board Creator. I click OK on the error message, and several seconds later Circuit Creator (or Board Creator) seems to start up ok. I say, "seems" because I don't know if there is an underlying problem that will make trouble later. A. This is a bug in win2000 program it self. It is not affected Circuit Creator program registration and its other components. Here I am send you link on this problem please go thru this and fix your Device Driver problem. ActiveWin2k: Bugs Fixed In Windows 2000 SP1 Q. I have finally been able to install Circuit Creator on my Windows XP Compaq laptop. The program "Board Creator" seems to run fine in all respects except that when I click on the icon to bring up a part, such as a dip socket", I get the message "REGISTRATION INVALID". No part selection dropdown menu appears. I can close the warning label and continue working on the board with all other functions seemingly normal. I have never used "logic Creator", however, he had me enter the program and I received no registration error message. A. Circuit Creator program is running ok only on WIN9X, WIN2000 and WIN-XP type operating systems. Right now you are using Windows-XP type operating systems so make sure which type of FAT you are using in your LAPTOP PC. (1) FAT32: Circuit Creator program is running ok on this type of FAT format. (2) NTFS: Circuit Creator doesn't running Ok on this type of FAT format. When you click on any Circuit Creator components your XP is given REGISTRATION INVALIDE type of error. Q. I put Circuit creator in my new computer and got the reg. file from you last month. This is the first time I have tried to print and I get an error. The first error box says, "Cannot create/ get printer config." The next box says "Unable to start print" A. You can’t copy paste Circuit Creator from one PC to another PC. First do one thing. Setup your default printer in CKTCRT from printer setup and make sure you have selected this printer as a default in your window program and make sure you have given correct paths in path in File/Preference/path/options then restart program and check it again. If the program doesn’t give you any error then continue with your work. Otherwise, re-install your printer driver and install it again and then try to print your file or get backup your all data and then uninstall it from your computer and restart your PC. Now you install CKRCRT program from program CD's only you receive from us copy cc32.akf file and send it for reregister. In future don't try to copy CKTCRT folder in other PC directly by copy paste. Q. I am finding that I will be using this package of programs more and more in the future. I would like to get this program back up and working as smoothly as it worked when I initially purchased it. So any patches of fixes would be welcome. A. You send your program version and date of purchase we will let you know for updates. TOP
| 
